PEC Core Compliance

Students who successfully complete Core Compliance training course will require annual refresher training to remain in compliance with environmental, health & safety regulations. When administered annually, PEC Core Refresher provides the necessary refresher training to maintain the training certificates obtained through Core Compliance. Core Refresher is a standardized 1-day safety training course that may be taken after completing Core Compliance to update training as required by employers or regulatory agencies.
 

Core Compliance provides the following safety training:

​

Meets Minimum Requirements for Full Classroom Training

• Access to Medical Records

• Back Safety

• Behavioral Based Safety

• Bloodborne Pathogens

• Control of Hazardous Energy (Lockout/Tagout)

• DOT Hazardous Materials

• Electrical Safety (Non-Qualified)

• Emergency Response

• Excavation and Trenching

• Fire Safety

• Hazard Communication

• Hazard Identification

• Hazardous Waste Operations and Emergency Response (Awareness and Operations level)

• Hearing Conservation

• Hydrogen Sulfide

• Job Safety Analysis (JSA)

• Marine Trash and Debris

• Occupational Health Hazards

• Office Safety

• Offshore

• Permit Required Confined Space (Entrant, Attendant, Supervisor)

• Personal Protective Equipment (PPE)

• Respiratory Protection

• Short Service Employees

• Stop Work Authority

• Terrorism Response Awareness Program

• Walking Working Surfaces and Elevated Work

• Work Permits

• Workplace Violence

​

Meets Awareness-Level Requirements

• Communication

• Drugs and Alcohol

• Fall Protection

• First Aid

• Hand Safety Awareness

• Housekeeping

• Incident Reporting and Investigation

• Motor Vehicle Safety

• OSHA Recordkeeping

• Powered Industrial Trucks (Forklift)

• Process Safety Management (PSM)

• Rigging

• Safety and Environmental Management Systems (SEMS)

• Scaffolding

• Welding, Cutting, and Brazing

PEC SafeLand

The PEC Basic Orientation safety awareness course includes both SafeGulf andSafeLandUSA. PEC Basic was designed to take the place of multiple Operator orientations and to give each student a general idea of life and safety issues in the oil and gas industry, upstream, downstream, onshore or offshore. This one-day program meets API RP 75 & API RP T-1 requirements and provides a basic understanding at an awareness level of certain general safety information that an employee should know before entering a company facility and while performing their assigned work duties. Over 25 of the leading oil and gas operators accept this orientation as it meets their requirements. Upon successful completion of course, each student is issued a picture ID with a unique barcode. The student information is then stored in an online database.

This orientation has become the standard program for the industry and certifies a student at awareness level for the following:

​

• SafeGulf Certification

• SafeLand Certification

• Confined Space

• Rigging

• Hydrogen Sulfide (H2S)

• Lockout/Tag-out

• Fall Protection

• Hazmat (HM 126)

• Hazardous communications

• Personal Protective Equipment

• Hearing Conservation

• Emergency Response

• Process Safety Management

• Welding Safety

• Defensive Driving

• Hazwoper (Oper.)

• Fire Protection

• Medical Records

• Forklift Safety

• Respiratory Protection

• Electrical Safety

• Terrorism Response Awareness Program (TRAP)

• Back Safety

• Alcohol and substance abuse awareness

• Offshore Transportation (Departure, Helicopter, Boat, Arrival, etc.)

• Offshore Safety (Swing Ropes / Personnel Baskets, Water Safety, etc.)

OSHA 10 Hour General Industry

This training program is intended to provide entry level general industry workers information about their rights, employer responsibilities, and how to file a complaint as well as how to identify, abate, avoid and prevent job related hazards on a job site. The training covers a variety of general industry safety and health hazards which a worker may encounter. Training should emphasize hazard identification, avoidance, control and prevention, not OSHA standards. Learning objectives on some of these topics are on the CD which is distributed in all OSHA General Industry trainer classes, and available for download at the Outreach Training Program website (www.osha.gov/dte/index.html). Instructional time must be a minimum of 10 hours.

The minimum topic requirements are as follows:

​

Mandatory - 7 Hours

1. Introduction to OSHA – 2 hours
   Covers workers’ rights, employer responsibilities and how to file a complaint. It includes helpful worker safety and health resources. It also provides samples of a weekly fatality and 3 catastrophe report, material data safety sheet and the OSHA Log of Work-Related Injuries and Illnesses.

2. Walking and Working Surfaces, including fall protection – 1 hour

3. Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire Protection – 1 hour

4. Electrical – 1 hour

5. Personal Protective Equipment – 1 hour

6. Hazard Communication – 1 hour

​

Elective - 2 Hours

Must present at least two hours of training on the following topics. At least two topics must be presented. The minimum length of any topic is one-half hour. 

• Hazardous Materials

• Materials Handling

• Machine Guarding 

• Introduction to Industrial Hygiene

• Bloodborne Pathogens 

• Ergonomics  

• Safety and Health Program

• Fall Protection

​

Optional - 1 Hour

Teach other general industry hazards or policies and/or expand on the mandatory or elective topics. The minimum length of any topic is one-half hour. 

OSHA 30 Hour General Industry

The 30-hour General Industry Outreach Training Program is intended to provide a variety of training to workers with some safety responsibility. Training should emphasize hazard identification, avoidance, control and prevention, not OSHA standards. Instructional time must be a minimum of 30 hours. 

The topic requirements are as follows:

​

Mandatory - 13 Hours

1. Introduction to OSHA – 2 Hours
   See above 10-hour section for additional information. 

2. Managing Safety and Health – 2 hours
   May include Injury and Illness Prevention Programs, job site inspections, accident prevention programs, management commitment and employee involvement, worksite analysis, hazard prevention and control, accident 4 investigations, how to conduct safety meetings, and supervisory communication. 

3. Walking and Working Surfaces, including fall protection – 1 hour

4. Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire Protection – 2 hours

5. Electrical – 2 hours. 

6. Personal Protective Equipment (PPE) – 1 hour

7. Materials Handling – 2 hours

8. Hazard Communication – 1 hour

​

Elective - 10 Hours

Must present at least 10 hours of training on the following topics. At least 5 topics must be presented. The minimum length of any topic is one-half hour. 

• Powered Industrial Vehicles

• Safety and Health Programs

• Fall Protection

• Ergonomics 

• Bloodborne Pathogens 

• Introduction to Industrial Hygiene 

• Welding, Cutting, and Brazing 

• Machine Guarding 

• Lockout / Tagout 

• Permit-Required Confined Spaces 

• Hazardous Materials (Flammable and Combustible Liquids, Spray Finishing, Compressed Gases, Dipping and Coating Operations) 

​

Optional - 7 Hour

Teach other general industry hazards or policies and/or expand on the mandatory or elective topics. The minimum length of any topic is one-half hour. 

OSHA 10 Hour Construction

This training program is intended to provide entry level construction workers information about their rights, employer responsibilities, and how to file a complaint as well as how to identify, abate, avoid and prevent job related hazards on a construction site. The training covers a variety of construction safety and health hazards which a worker may encounter at a construction site. Training should emphasize hazard identification, avoidance, control and prevention, not OSHA standards. Instructional time must be a minimum of 10 hours. 

​

The topic requirements are as follows:

​

Mandatory - 7 Hours

1. Introduction to OSHA – 2 hours
   OSHA has required training content for this module – see Introduction to OSHA.
   Covers workers’ rights, employer responsibilities and how to file a complaint. It includes helpful worker safety and health resources. It also provides a sample weekly fatality and catastrophe report, a material data safety sheet and the OSHA Log of Work-Related Injuries and Illnesses (OSHA Form 300).
   Materials include an Instructor Guide, PowerPoint slides, student handouts, and participatory activities.

2. OSHA Focus Four Hazards – 4 hours
   Because most construction fatalities are caused by fall hazards, falls must be covered for a minimum of one hour and 15 minutes. The other Focus Four Hazards must be covered for a minimum of one-half hour each.
   Falls (minimum one hour and 15 minutes)
   Electrocution
   Struck-By (e.g., falling objects, trucks, cranes)
   Caught-In or Between (e.g., trench hazards, equipment)

3. Personal Protective and Lifesaving Equipment – 30 minutes

4. Health Hazards in Construction – 30 minutes
   May teach noise, hazard communication, and crystalline silica or any other construction health hazard.

​

Elective - 2 Hours

Must present at least two hours of training on the following topics. At least 5 topics must be presented. The minimum length of any topic is one-half hour. 

• Cranes, Derricks, Hoists, Elevators, & Conveyors

• Excavations

• Materials Handling, Storage, Use and Disposal

• Scaffolds

• Stairways and Ladders

• Tools – Hand and Power

​

Optional - 1 Hour

Teach other construction industry hazards or policies and/or expand on the mandatory or elective topics. The minimum length of any topic is one-half hour.

OSHA 30 Hour Construction

The 30-hour Construction Outreach Training Program is intended to provide a variety of training to workers with some safety responsibility. Training should emphasize hazard identification, avoidance, control and prevention, not OSHA standards. Instructional time must be a minimum of 30 hours. 

The topic requirements are as follows:

​

Mandatory - 15 Hours

1. Introduction to OSHA – 2 hours
   OSHA has required training content for this module – see Introduction to OSHA.
   Covers workers’ rights, employer responsibilities and how to file a complaint. It includes helpful worker safety and health resources. It also provides a sample weekly fatality and catastrophe report, a material data safety sheet and the OSHA Log of Work-Related Injuries and Illnesses (OSHA Form 300).
   Materials include an Instructor Guide, PowerPoint slides, student handouts, and participatory activities.

2. Managing Safety and Health – 2 hours
   May include Injury and Illness Prevention Programs, job site inspections, accident prevention programs, management commitment and employee involvement, worksite analysis, hazard prevention and control, accident investigations, how to conduct safety meetings, and supervisory communication.

3. OSHA Focus Four Hazards – 6 hours
   Because most construction fatalities are caused by fall hazards, falls must be covered for a minimum of one hour and 15 minutes. The other focus four hazards must be covered for a minimum of one-half hour each. A trainer may spend up to 10 hours on this topic.
   Falls (minimum one hour and 15 minutes)
   Electrocution
   Struck-By (e.g., falling objects, trucks, cranes)
   Caught-In or Between (e.g., trench hazards, equipment)

4. Personal Protective and Lifesaving Equipment – 2 hours

5. Health Hazards in Construction – 2 hours
   May teach noise, hazard communication, and crystalline silica or any other construction health hazard.

6. Stairways and Ladders – 1 hour

​

Elective - 12 Hours

Must present at least 12 hours of training on the following topics. At least 6 topics must be presented. The minimum length of any topic is one-half hour. 

• Concrete and Masonry Construction

• Confined Space Entry

• Cranes, Derricks, Hoists, Elevators, & Conveyors

• Ergonomics

• Excavations

• Fire Protection and Prevention

• Materials Handling, Storage, Use and Disposal

• Motor Vehicles, Mechanized Equipment and Marine Operations; Rollover Protective Structures and Overhead

• Protection; and Signs, Signals and Barricades

• Powered Industrial Vehicles

• Safety and Health Programs

• Scaffolds

• Steel Erection

• Tools – Hand and Power

• Welding and Cutting

​

Optional - 3 Hour

Teach other general industry hazards or policies and/or expand on the mandatory or elective topics. The minimum length of any topic is one-half hour. 

Forklift

The LTO program includes 7 interrelated but independent instructional modules. 

OSHA Regulations
 

• Lift Truck Design and Operating Principles

• Pre-Shift Safety Inspection & Preventive Maintenance

• Worksite Inspections

• Pick Up a Load

• Deliver a Load

• Apply Lift Truck Operator Safety Skills

Rough Terrain Forklift

Most countries require or recommend operators of telehandlers to be trained before any operation. This class teaches operators to safely operate JLG Telehandlers based on the requirements of the Occupational Safety and Health Administration (OSHA) standards and the International Organization for Standardization (ISO) standards.

Aerial Work Platform / Scissor Lifts

Most countries require or recommend operators of Aerial Work Platforms (AWPs) or Mobile Elevated Work Platforms (MEWPs) to be trained before any operation. This class teaches operators to safely operate Aerial Work Platforms based on the requirements of the American National Standards Institute/Scaffold Industry Association (ANSI/SIA) standards and the International Organization for Standardization (ISO) standards.

Flagging / Traffic Control 

Controlling traffic through work areas is one of the most important — and dangerous — operations in construction maintenance. The National Safety Council’s Flagger Training Course is a comprehensive skill-building session that meets federal industry guidelines: the Manual on Uniform Traffic Control Devices (MUTCD) guidelines and the ANSI standard ISEA-107-1999. The Office of Highway Safety, the Federal Highway Administration, and several state Departments of Transportation have reviewed this program.
 

Training goal

The primary objectives of the program are to train flaggers to provide safe passage of traffic through and around work areas and to minimize confusion by bringing standard flagging procedures to our nation’s highways. To get your crew members trained and certified in safe flagging techniques in just four hours.

​

Who should attend?

This course is a must for novice construction work zone flaggers in both one- and two-person flagging operations. Experienced flaggers can attend this course as a refresher. All attendees receive a certificate of course completion.

​

What you’ll learn:

​​

• Thorough understanding of flagging procedures and proper use of required equipment.​

• flagging skills from hands-on training, classroom activities and a flagging skills test.

• Increased ability to coordinate traffic movement through the work zone.

Defensive Driving 

DDC 4 provides key understanding, skills and techniques to avoid collisions, reduce traffic violations and change driver behaviors and attitudes. DDC 4 offers the greatest flexibility for organizations who would like to customize their training program in session blocks. The course is available in English and Spanish and can be tailored to address local driving and road conditions, as well as company policy.

​

What participants will learn

Participants will acquire the basic knowledge and techniques to recognize potential hazards and avoid collisions and violation. The course will motivate them to change their behindthe-wheel behaviors and attitudes. Students will learn coping techniques for dealing with speeding, distracted driving, impaired driving, and hazardous traffic conditions and more.

​

The result will be a more responsible driver who understands best practices to prevent injury and death while driving a motor vehicle.

General Safety Programs

Programs can be held at our facility or yours!

• Hazard Communication / GHS

• Personal Protective Equipment

• Confined Space

• Job Safety Analysis (JSA)

• Hydrogen Sulfide (H2S)

• Ergonomics

• Lockout / Tagout (LOTO)

• Machinery Safeguarding

• Safety Committee Training

• Accident Investigation

• Fall Protection

• Defensive Driving Awareness

Additional Programs

• Medic First Aid / CPR / AED

• Medic First Aid / CPR / AED Instructor Training

• Bloodborne Pathogens